Abstract L-Asparaginase (L-ASNase) is a biopharmaceutical used for acute lymphoblastic leukaemia (ALL) treatment, dramatically increasing the patients’ chance of cure. However, its production and distribution in developing countries were disrupted because of its low profitability, which caused great concern among patients. This study evaluates the feasibility of combining fractional precipitation and aqueous two-phase systems (ATPS) to purify L-ASNase from a low-grade product, commercially known as Acrylaway® L. The ATPS purification results were not particularly expressive compared to the two-step purification process composed of ethanol precipitation and gel filtration, which was able to recover the target molecule with a purification factor over 5 fold. Thus, we studied a purification process capable of manufacturing pharmaceutical grade L-ASNase from a commercially available low-grade raw material; however, improvements regarding its throughput must be achieved, and high purity is the first step to apply it as a new biopharmaceutical product. The proposed process could pose as a short-time solution to mitigate its shortage while a cost-effective production plant is being developed.

Abstract Antibodies and antibody fragments are nowadays among the most important biotechnological products, and Pichia pastoris is one of the most important vectors to produce them as well as other recombinant proteins. The conditions to effectively cultivate a P. pastoris strain previously genetically modified to produce the single-chain variable fragment anti low density lipoprotein (-) under the control of the alcohol oxidase promoter have been investigated in this study. In particular, it was evaluated if, and eventually how, the carbon source (glucose or glycerol) used in the preculture preceding cryopreservation in 20% glycerol influences both cell and antibody fragment productions either in flasks or in bioreactor. Although in flasks the volumetric productivity of the antibody fragment secreted by cells precultured, cryopreserved and reactivated in glycerol was 42.9% higher compared with cells precultured in glucose, the use of glycerol in bioreactor led to a remarkable shortening of the lag phase, thereby increasing it by no less than thrice compared to flasks. These results are quite promising in comparison with those reported in the literature for possible future industrial applications of this cultivation, taking into account that the overall process time was reduced by around 8 h.

The main aim of this study was to develop scaffolds based on alginate, chitosan and hybrid fibers with and without glycerol. The scaffolds developed underwent assessments for tensile property, swelling ratio and weight loss, cellular viability, degradation and biomineralization, as well as DSC/TGA thermal analysis. Tenacity values showed that use of glycerol and the interaction between alginate and chitosan as a hybrid fiber were associated with increasing tenacity values. In the swelling and weight loss study, the scaffolds containing glycerol presented lower weight loss and higher water absorption values in all scaffolds, compared to scaffolds without glycerol, indicating that glycerol acted as a stabilizer. None of the alginate, chitosan and hybrid scaffolds, with or without glycerol, decreased cell viability. On the third day of the biomineralization assay, chitosan without glycerol indicated the presence of apatite crystals. The degradation study showed that glycerol may have acted as a stabilizer.

Proteases hydrolyze the peptide bonds of proteins into peptides and amino acids, being found in all living organisms, and are essential for cell growth and differentiation. Proteolytic enzymes have potential application in a wide number of industrial processes such as food, laundry detergent and pharmaceutical. Proteases from microbial sources have dominated applications in industrial sectors. Fungal proteases are used for hydrolyzing protein and other components of soy beans and wheat in soy sauce production. Proteases can be produced in large quantities in a short time by established methods of fermentation. The parameters such as variation in C/N ratio, presence of some sugars, besides several other physical factors are important in the development of fermentation process. Proteases of fungal origin can be produced cost effectively, have an advantage faster production, the ease with which the enzymes can be modified and mycelium can be easily removed by filtration. The production of proteases has been carried out using submerged fermentation, but conditions in solid state fermentation lead to several potential advantages for the production of fungal enzymes. This review focuses on the production of fungal proteases, their distribution, structural-functional aspects, physical and chemical parameters, and the use of these enzymes in industrial applications.

Clostridium perfringensé uma bactéria anaeróbia Gram-positiva, amplamente distribuída no meio ambiente e comumente encontrada no intestino de animais, incluindo o homem. As espécies de C. perfringensestão classificadas em cinco tipos toxigênicos (A, B, C, D, E) em função da produção de quatro toxinas (±, ², µ, ¹). Entretanto, as toxinas teta, delta, lambda e enterotoxina são também sintetizadas por outras espécies dessa bactéria. Muitas metodologias para purificação das toxinas produzidas por C. perfringens têm sido propostas e, portanto, nesta revisão foram apresentados e discutidos os métodos e resultados de purificação dessas toxinas relatados nas últimas quatro décadas.

Clostridium perfringens, a Gram-positive anaerobic bacterium, is widespread in the environment and commonly found in the intestines of animals, including humans. C. perfringens strains are classified into five toxinotypes (A, B, C, D and E) based on the production of four major toxins (±, ², µ, ¹). However the toxins (theta, delta, lambda and enterotoxin) are also synthesized by C. perfringens strain. Many attempts to purify the toxins produced by C. perfringens have been proposed. In this review we discuss the purification methods used to isolate toxins from C. perfringens reported in last four decades.

Glicose-6-fosfato desidrogenase (G6PDH) e hexoquinase (HK) são importantes enzimas usadas em estudos bioquímicos e médicos e em diversos métodos analíticos. Sistema de duas fases aquosas (SDFA) formado por uma solução polimérica e uma solução eletrolítica proporciona um método para separação e purificação de enzimas com diversas vantagens, incluindo biocompatibilidade, que pode ser facilmente escalonado para nível industrial. Neste trabalho, os efeitos de diferentes valores de pH na estabilidade e na partição (K, coeficiente de partição) por SDFA das enzimas G6PDH e HK, obtidas através de levedura de panificação, foram investigados. Os resultados, obtidos do sistema constituído por 17,5% de PEG 400 e 15,0% de fosfato, mostraram que com a elevação do pH de 5,0 para 8,8, o K HK aumentou 26 vezes e o K G6PDH 2,2 vezes. No sistema 20,0% PEG 1500 : 17,5% fosfato, quando o valor do pH variou de 3,8 para 8,8. os valores de K HK e K G6PDH aumentaram e 13 vezes e 1,2 vez, respectivamente. Isto permite concluir que o coeficiente de partição, para ambas as enzimas, é favorecido pela elevação do pH. Uma análise estatística dos resultados foi conduzida para confirmar esta conclusão.

Glucose-6-phosphate dehydrogenase (G6PDH) and hexokinase (HK) are important enzymes used in biochemical and medical studies and in several analytical methods. Aqueous two-phase system (ATPS) formed by a polymer solution and an electrolyte solution provides a method for the separation and purification of enzymes with several advantages, including biocompatibility and easy scale up of the process. In this work, the effects of different pH values on the storage stability and partitioning behavior (K, partition coefficient) of the enzymes G6PDH and HK from baker's yeast extract were investigated in ATPS. The results, obtained from the 17.5% PEG 400 : 15.0% phosphate system, showed that when the pH was increased from 5.0 to 8.8, the K HK increased 26-fold and the K G6PDH 2.2-fold. In the 20.0% PEG 1500 : 17.5% phosphate system, the K HK and K G6PDH increased 13 and 1.2-fold, when the pH value was increased from 3.8 to 8.8, respectively. This leads to the conclusion that the partition coefficient for both enzymes is favored by high pH values. A statistical analysis of the results was conducted to confirm this conclusion.